To: Sensitech Customers
From: Technical Support and Marketing
Date: December, 2004
Re: TT4 LCD Programming Option

Affected Systems

Single Use Overwrite and Multi-Use TempTale4 2K Ambient monitors that are re-configurable in the field AND are programmed at Sensitech with the LCD option enabled to Display Last Temperature Value Recorded.

Description of the Display Last Temperature Recorded Feature

While the TempTale monitor is running the LCD will continually display the reading of the last temperature point recorded in the LCD window. This reading is updated with the most recent data point recorded at the programmed measurement interval until the TempTale has reached its memory capacity or is manually stopped by pressing the Stop button.  

Problem Cause

The Display Last Temperature Value Recorded option is disabled when a TT4 2K Multi-Use or Single Use Overwrite monitor is re-configured with software other than TempTale Manager Desktop 4.0. Remember: This LCD display option can only be factory-programmed at Sensitech.

Solution

The Display Last Temperature Value Recorded option will be remain enabled when TT4 Multi-Use and Single Use Overwrite monitors are re-configured using TempTale Manager Desktop 4.0, only.

Contact Information
Call Sensitech at 0031 252 211 108 and request the Customer Support Department

HOME | OVER | PRODUCTEN | TOEPASSINGEN | COLD CHAIN INFORMATIE | SUPPORT
KLANTEN LOGIN | KWALITEITSCERTIFICERING | CONTACT | PRIVACY POLICY

Copyright © 2005 Sensitech. All Rights Reserved.